A 6.7 inch phone is heavy enough that the best iPhone 16 Plus cases are judged on two things a smaller phone would not care about. The first is how hard the magnets hold, because a Plus on a weak car mount comes off at the first pothole. The second is whether the case stands up on its own, since nobody holds a phone this size through a long video. The Pro is the opposite problem, as our guide to the best iPhone 16 Pro cases explains. Samsung sells the same size, covered in our guide to the best Samsung Galaxy S26 Plus cases.
Magnet strength is quoted in two different units across these listings, which makes comparison harder than it should be. Most sellers give grams of holding force, one gives newtons, and the figures here run from about 1,350 to 1,500 grams once converted. The kickstands differ even more: one adjusts across 130 degrees, another stops at 75, and two simply pull out to a single position. The largest iPhone needs the strongest, which our guide to the best iPhone 16 Pro Max cases covers.
Best iPhone 16 Plus Cases Compared on Magnets, Stands and Covers
Read the magnet column against where the phone is mounted and the stand column against what you watch on it.
| Case | Magnet hold | Kickstand | Camera cover | Screen protection |
|---|---|---|---|---|
| SUPCASE | N52 magnets, up to 1,500 g | Aluminium alloy, multi-angle | None, Camera Control button built in | 1.0 mm raised bezel, 2.0 mm camera |
| Lanhiem Metal | 1,500 g holding force | Metal, adjustable 0 to 130 degrees | Camera guard doubles as the stand | 9H tempered glass plus lens protector |
| Dexnor | Up to 1,400 g | Aluminium alloy, landscape and portrait | Magnet-repulsion slide cover | Built-in screen protector |
| SURITCH | 13.28 N, about 1,350 g | Aluminium alloy, adjustable to 75 degrees | Slides open in half a second | Raised edges, no protector included |
| Poetic Revolution | Not published | Pull-out kickstand | Slide camera cover | Two front frames supplied, one with film |
| Temdan | Tested thousands of hours under pressure | Invisible, hovers on bearings | None | 1.5 mm screen, 2.0 mm camera edges |
| TUCCH Wallet | Magnetic flap closure | Cover props it up | None | Dual layer with a soft TPU interior |
Reading Magnet Figures, Stand Angles and Sliding Camera Covers
The MagSafe figures in this category are published in mixed units and that is worth untangling once. A newton is roughly 102 grams of force, so SURITCH quoting 13.28 N is claiming about 1,350 grams, which puts it just below Dexnor at 1,400 and SUPCASE and Lanhiem at 1,500. Those are all genuinely strong; a case with no magnet ring at all manages a fraction of it and will not hold a phone this heavy on a vent mount.
Kickstand range is where these differ most and the numbers are not marketing. Lanhiem’s metal stand adjusts across 0 to 130 degrees, which covers everything from nearly flat on a desk to upright on a train table. SURITCH stops at 75 degrees, which is fine for video and awkward for typing. Temdan uses non-inductive bearings with a magnetic buckle so the stand hovers at any point rather than clicking into steps, and the aluminium stands on the SUPCASE and Dexnor work in both orientations.
Sliding camera covers are the feature this size of phone attracts, and three cases here have one. The better versions use magnetic repulsion so the cover flicks open in under a second rather than needing a fingernail. They protect the lenses from scratches and dust in a bag, which matters because a scratched lens softens every photo permanently. Most of these also publish military drop claims, and our guide to the best magsafe chargers covers which chargers still align through a case this thick.
1. SUPCASE: The Only Case That Keeps Camera Control Working Properly
The iPhone 16 Plus has a pressure and touch sensitive Camera Control strip on its side, and a thick case can make it useless. SUPCASE has built an integrated capture button into the case that works with the native camera functions, so you can take photos, record and adjust settings without peeling the case back.
The rest is specified unusually clearly. N52 neodymium magnets delivering up to 1,500 grams of holding force, a 15 foot drop claim from a shock-absorbing TPU inner frame inside a rigid polycarbonate shell with four corner airbags, and bezels raised 2.0 millimetres above the camera and 1.0 millimetre above the screen. The kickstand is aluminium alloy and works in landscape or portrait. Every number here is a number rather than an adjective.
What it does well
- Integrated Camera Control capture button.
- N52 magnets at up to 1,500 g of holding force.
- 15 foot drop claim with four-corner airbags.
- 2.0 mm camera and 1.0 mm screen bezels published.
What to know before buying
- No sliding camera cover.
- Thicker than a slim magnetic case.
- No screen protector in the box.
2. Lanhiem Metal: A Stand That Adjusts Across 130 Degrees
Nobody else here gives you this much range. Lanhiem’s built-in metal kickstand adjusts freely from 0 to 130 degrees, and the company’s claim that this covers 99 percent of situations is close to fair: it holds nearly flat for typing on a desk and fully upright for watching on a train table, with everything in between.
The stand doubles as the camera guard, so one piece of metal does two jobs. The construction is a rugged metal frame over a resilient silicone inner bumper, giving double-layer cushioning and a 10 foot military grade drop claim, and the magnets hold at 1,500 grams. It is the only case here that ships both a 9H tempered glass screen protector and a separate camera lens protector in the box.
What it does well
- Metal kickstand adjustable across 0 to 130 degrees.
- Ships with 9H tempered glass and a lens protector.
- 1,500 g magnetic holding force.
- Metal frame over a silicone inner bumper.
What to know before buying
- A metal frame adds real weight to an already heavy phone.
- 10 foot drop claim is the lowest here.
- Metal cases can interfere with signal more than plastic.
3. Dexnor: The Best Sliding Camera Cover, With a Screen Protector Included
Dexnor has solved the irritation of camera sliders. Most of them need a fingernail and a moment you do not have; this one uses magnet-repulsion technology so a flick opens it cleanly, which means you still take the photo you were reaching for.
It is the most complete package here for an outdoor phone. The magnetic hold reaches 1,400 grams, the adjustable kickstand is aluminium alloy and works in both landscape and portrait, there is a built-in screen protector, and the body is shock-absorbent TPU bumpers around a rigid polycarbonate back with a military grade claim. Dexnor pitches it at trails and outdoor use, and the specification matches that rather than contradicting it.
What it does well
- Magnet-repulsion slider that opens with a flick.
- 1,400 g magnetic hold for mounts and chargers.
- Adjustable aluminium kickstand in both orientations.
- Built-in screen protector included.
What to know before buying
- No published drop height, only military grade.
- The slider adds thickness over the camera bump.
- One of the bulkier cases here.
4. Poetic Revolution: Two Front Frames, So You Choose the Screen Protection
Poetic has done something genuinely thoughtful that nobody else here does. The case ships with two front frames: one with a built-in screen film and one without. Use the first if you want an integrated protector with nothing to align, or use the second with your own tempered glass if you prefer optical clarity and the ability to replace it.
That removes the usual compromise of full-body cases, where a laminated plastic protector is permanent and often slightly soft under a finger. The rest is a serious rugged case: a 20 foot military grade drop claim, the highest in this guide, a pull-out kickstand for landscape or portrait, and a sliding camera cover. Poetic does not publish a magnet figure, which is the one gap.
What it does well
- Two front frames supplied, with and without film.
- 20 foot drop claim, the highest here.
- Sliding camera cover and a pull-out kickstand.
- Full-body polycarbonate casing front and back.
What to know before buying
- No published magnet holding force.
- Pull-out stand has one position rather than a range.
- Full-body cases are the bulkiest option.
5. SURITCH: A Slider That Opens in Half a Second
SURITCH quotes the one number that matters for a camera cover: half a second to open. The magnetic-repulsion mechanism means you push and it goes, which is the difference between using the cover and leaving it open permanently out of frustration.
The magnets are published in newtons rather than grams, at 13.28 N, which works out at roughly 1,350 grams and is in the same class as its rivals here. The aluminium alloy kickstand adjusts up to 75 degrees in landscape or portrait, which covers viewing well and typing less so. Protection is shock-absorbent TPU bumpers with raised edges, and SURITCH states clearly in the listing that no screen protector is included, which is more honest than most.
What it does well
- Camera slider opens in about half a second.
- Published magnet figure of 13.28 N, about 1,350 g.
- Aluminium kickstand adjustable to 75 degrees.
- States plainly that no screen protector is included.
What to know before buying
- No screen protector in the box.
- 75 degrees is a viewing angle, not a typing one.
- No published drop height.
6. Temdan: An Invisible Stand in a Slim Translucent Case
Temdan has hidden the kickstand rather than bolting it on. It sits flush in the back and uses non-inductive bearings with a magnetic buckle, so it hovers and holds at any angle rather than snapping to preset steps, and when it is closed you cannot see it.
That makes this the slim case in a guide full of armour. It is translucent matte with an anti-fingerprint treatment, so it stays clean, and a non-slip grip runs down the sides. Temdan says the case has been through more than 2,500 drop tests from every angle, and the edges are raised 1.5 millimetres above the screen and 2.0 above the camera. The magnet ring has been pressure tested for thousands of hours so it does not delaminate, which is how cheap magnetic cases usually fail.
What it does well
- Invisible kickstand that hovers at any angle.
- Slim translucent matte body with anti-fingerprint coating.
- 2,500 plus drop tests from all angles.
- 1.5 mm screen and 2.0 mm camera edges.
What to know before buying
- Magnet strength given as test duration, not force.
- Less impact protection than the full-body cases.
- Translucent finishes discolour over time.
7. TUCCH Wallet: Four Cards, a Money Pocket and a Lifetime Warranty
A 6.7 inch phone is already the size of a small wallet, so turning it into one is a reasonable idea. TUCCH uses premium PU leather with four card slots and a larger pocket for cash, with RFID blocking material through the card section to stop contactless scanning.
The flap closes magnetically rather than relying on a tab, and folds back to prop the phone up hands-free. Inside, a soft TPU shell with a shockproof edge covers all four corners, so it is a dual-layer case rather than a leather envelope. TUCCH covers it with a lifetime warranty against non-accidental faults. It is the one case here for leaving the house with nothing in your other pocket.
What it does well
- Four card slots plus a cash pocket.
- RFID blocking through the card section.
- Magnetic flap closure that props the phone up.
- Lifetime warranty against manufacturing faults.
What to know before buying
- No drop rating published.
- Folio wallets add considerable bulk to a Plus.
- Cards between phone and charger can block wireless charging.
Buying for a Phone This Size
The Plus is heavy, and weight changes which features earn their place. These are the checks that matter on a 6.7 inch phone specifically.
- Compare magnet figures in the same unit, since 1 newton is about 102 grams.
- Check the kickstand angle range rather than whether it has one.
- If you use Camera Control, confirm the case does not block it.
- Decide between a built-in screen protector and your own tempered glass.
- Check whether a camera slider needs a fingernail or opens with a push.
- On a wallet case, expect to remove the phone to charge it wirelessly.
A heavy phone also drains faster and gets propped up more, which is why the stand and the charger end up mattering together. Our guide to the best power banks covers which magnetic packs hold a phone this heavy without sagging off the back, and if you are moving up a generation our guide to the best iPhone 17 case covers the current lineup.
Which iPhone 16 Plus Case to Buy
For most people the SUPCASE is the right purchase, because it is the only case here that keeps Camera Control working properly while also publishing 1,500 grams of magnet force, a 15 foot drop claim and both bezel measurements. If you want the most adjustable stand instead, buy the Lanhiem: 0 to 130 degrees with tempered glass and a lens protector in the box is a lot of case for the money.
Buy the Dexnor if you want a camera slider that actually gets used and a screen protector included, and the Poetic Revolution if you want the highest drop claim and the choice of which screen protection to run. The SURITCH is the slimmest of the slider cases, the Temdan is the one to pick if you want a stand without the bulk, and the TUCCH is for anyone who would rather carry cards than a drop rating.
Frequently Asked Questions
How strong do the magnets need to be on a Plus?
Stronger than on a smaller iPhone, because the phone is heavier and a mount has more mass to hold. The cases here publish 1,350 to 1,500 grams of holding force, and anything in that range will stay on a car vent mount over rough roads. Watch the units: one seller quotes newtons, and one newton is about 102 grams, so 13.28 N is roughly 1,350 g rather than a tiny number.
Will a case block the Camera Control button?
A thick case can, because Camera Control is a touch and pressure sensitive strip rather than a mechanical button. Cases solve it either with a cutout or with an integrated conductive button that passes the touch through. One case in this guide builds in a capture button that works with the native camera app; if you use that control, check for it specifically.
Are sliding camera covers worth having?
They protect the lenses from the scratches that come from a bag full of keys, and a scratched lens permanently softens photos. The practical question is whether the slider is quick enough that you keep using it. The better ones here use magnetic repulsion and open with a push in under a second; a stiff slider gets left open within a week.
Should I pick a case with a built-in screen protector?
It depends on whether you value convenience or clarity. A laminated protector has nothing to align and no bubbles, but it cannot be replaced when it scratches and often feels slightly soft. One case here ships two front frames so you can choose, which is the best answer to the question anyone in this category has come up with.
Related Articles
- Best iPhone 16 Cases: 7 Compared on Magnet Strength and Drop Height
- Best iPhone 18 Pro Screen Protectors Compared
- Best AirPods 5 Cases: 7 Compared on Locks, MagSafe and Water Sealing
As an Amazon Associate, CanyonWire earns from qualifying purchases.
